Right-Products.com

Big Joe Forklift
Model PDC-30-60 24Volt 3,000 Lbs. @ 24"L.C. 60" Lift, 24V

This Sale is for both 1 used and Big Joe walk behind Forklift and Electric Charger.

Big Joe PDC-30-60 24v Forklift
 
This is a used electric forklift with battery and charger.  The battery charges and hold charge and the fork lift has worked well.  It was last used in good working condition a year ago and then put in outside storage.  When un-tarped  the battery tested ok but the battery light indicator did not light or motors start which indicates a contact or relay issue or some other electrical connection interference which needs attention.  The unit now has some light surface rust on it from air moisture which in not a structural problem just a visual one which can easily be fixed..

This lift is being sold as is with these issues to be corrected by the new owner at price listed for as if time were to be invested on this end to correct listed issues the price would increase substantially at professional repair hourly rates.  So this is a DIY fix to save money on what is a very valuable forklift. Keep in mind... These units last for ever, the manufacture still has the unit number 3 working out in the field. Just bring it back to life and keep and use.

One of the most desirable features of this walk behind forklift besides its quiet pollution free operation inside enclosed working spaces is it's tight turning radius which is much tighter and useful than a regular forklift truck.  

PDC-30-60 24Volt

PDC-30-60 24Volt - Specifications
  Name Value
1. Capacity 3000
2. Load Center 24
3. Lift Height 60
4. Collapsed Height 77
5. Extended Overall Height 80
6. Overall Width 36
7. Power Head Length 67.38
8. Turning Radius 59.75
9. Fork I.D. (min) 8
10. Fork O.D. (max) 32
11. Fork Length 36 or 42 or 48
12. Fork Height Lowered 2
13. Approx. Shipping Weight w/ Standard Battery 4746
14. Approx. Shipping Weight w/out Standard Battery 4025
15. Free Lift 57
16. Load Wheel Diameter 10.5
17. Standard Battery Weight 721
18. Standard Charger Weight 60
19. Fork Tilt Forward 3
20. Fork Tilt Reverse 9
21. Battery Amp Hours 340
22. Drive Wheel Diameter 10.5
23. Load Backrest Extension Height 48
24. Charger Amp Hours 40
25. Voltage 24
26. Center Line Load Wheel to Center Line Drive Wheel 49.31
27. Battery Compartment Dimensions  

 

PDC-30-60 24Volt - Options
1. Auxiliary Valve; 1 spool for 2-way function; with hoses
2. Auxiliary Valve; 1 spool for 2-way function; with hoses; one hose reel (left side) - for Full Free Lift & TRIMAST models
3. Auxiliary Valve; 2 spool for 4-way function; with hoses
4. Auxiliary Valve; 2 spool for 4-way function; with hoses; two hose reels (both sides) - for Full Free Lift & TRIMAST models
5. Battery - 24V 340 A.H. to replace 24V 300 A.H.
6. Battery - 24V 510 A.H. to replace 24V 300 A.H.
7. Battery - 24V 510 A.H. to replace 24V 340 A.H.
8. Battery Discharge Indicator - guage type
9. Battery Discharge Indicator with Lift Lockout - gauge type
10. Battery Rollers
11. Charger - 24V 120amp (3 phase only) Fully Automatic To Replace 24V 40amp
12. Charger - 24V 75amp Fully Automatic To Replace 24V 40amp
13. Charger - 24V 90amp Fully Automatic To Replace 24V 40amp
14. Cold Conditioning
15. Fork O.D.change - up to 36"; special wide fork carriage
16. Full free lift - Consult factory for availability
17. Hour meter; records lift and drive motor time
18. Keyswitch - for lift
19. Ram Attachment - Model T350-H, 48" long, 1000 lbs capacity @ 24" L.C., adjustable fork models only
20. Remote Lift & Lower in Handle
21. Remote Lift & Lower in Handle plus Pushbutton Box
22. Remote Lift & Lower; with pushbutton box and 3' cord
23. Remote Lift Only in Handle
24. Speed Control - time delays
25. Speed control; transistor, infinitely variable
26. Transmission; high torque; 25.7:1 gear ratio

STANDARD EQUIPMENT

  • Interlocked I-Beam Mast.
    The premium steel mast construction features interlocked steel channel and I-Beam design and roller-bearing surfaces for long mast life. Interlock channel and I-Beam mast accommodates high lifting stresses and maintains load stability.
  • Direction Reversing Impact Switch.
    A reversing switch, built into the control handle is designed to reverse truck direction on impact with the operator.
  • Versatile Braking Systems.
    • Two-way mechanical brake in top and bottom of handle arc actuates automotive-type disc brake in proportion to handle movement, allowing operator complete control of braking. When released, "dead man" feature returns handle to upright position, turns off electric power and applies the brake.
    • Dynamic brake, actuated by push-buttons in the control handle, provides gentle, jar-free electrical braking for accurate payload positioning and protection.
  • Easy Access Service Panel.
    Full-access design makes maintenance fast and easy. Hinged doors and removable panels permit quick access to electrical circuitry, drive train and hydraulic components for all normal maintenance.
  • Fully Protected Electrical System
    Fully fuse protected, heavy-duty industrial contactors are standard. All wiring is coded and has quick-disconnect terminals for easy servicing.
  • High Strength Construction.
    Unitized continuous welded steel in every Big Joe frame minimizes structural deterioration.
  • Dual Tilt Cylinders (PDC only).
    For greater safety, less twisting and distortion of mast section.
  • Emergency Power Disconnect.
    Externally mounted, quick-release battery disconnect is readily accessible to remove all power from truck circuits in the event of an emergency.
  • Special Alloy Forks.
    Heavy-duty I.T.A. forks are heat-treated alloy steel and formed to preserve full strength at the fork heel. Bottom taper of 14 inches and beveled fork tips allow easy pallet entry and exit.
  • I.T.A. Class II Carriage (PDC only).
    I.T.A. Class II Carriage makes changing from forks to attachments simple. No tools or pin removal are required. Changing outside fork dimension is equally easy.
  • Chrome Plated Lift Cylinder.
    For long life and low ram maintenance.

SPECIFICATIONS

Lifting Capacity:
1,500 to 4,000 lbs. at 24" load center
Lift Range: 60" - 194"
Power System: 12V/24V
Turning Radius: From 48"
Travel: Three speeds forward and reverse


This item is currently located in Lockport, IL about 30 miles southwest of Chicago.

This item is available for local pickup from the buyer or transportation arrangements can be made to have the item shipped at your expense to your location.

Payment must clear before this item can be removed from premises.
Buyer must provide proper type vehicle for safe and proper loading and transport as this item will not be released otherwise until such is provided.
Buyer is responsible for all loading, handling and transport not the seller.


Purchase Price $1,500.00
Purchase Down payment $125.00
Balance Due 1,125.00 Prior to pickup arrangements.

Note: Purchase Down payment is Non-Refundable

Being sold as is / used surplus / all sales final.

Contact for purchase and payment Options > Contact Page

TERMS & CONDITIONS
 
VEHICLE TRANSFER: THE BUYER MUST ARRANGE FOR LOCAL PICK UP FROM LOCKPORT, IL S.W. OF CHICAGO.  I WILL BE HAPPY TO WORK WITH YOU ON ARRANGING OUT OF STATE TRANSPORTATION SERVICES IF NEEDED FROM MY END TO HELP YOU GET THIS Forklift TO YOUR LOCATION.  EVERY ATTEMPT HAS BEEN MADE TO SHOW THE ITEM AS IT IS FOR SALE INCLUDING INSPECTION APPOINTMENTS INCLUDING PHONE / EMAIL Q & A. IF YOU HAVE ANY QUESTIONS OR CONCERNS THAT NEED ANSWERING YOU MUST DO IT BEFORE YOU COMMIT TO BUY AND THE AND SALE IS AWARD TO YOU, AS THIS VEHICLE IS BEING SOLD "AS IS" , "WHERE IS".

A NON-REFUNDABLE 10% PURCHASE DOWNPAYMENT DEPOSIT OF THE SALE PRICE MUST BE "RECEIVED" IN THE FORM OF PAYPAL, MONEY ORDER, CASHIER'S CHECK OR CASH WITHIN 4 DAYS OF YOU COMMITMENT TO BUY THIS
ITEM. IF THE DEPOSIT IS NOT RECEIVED BY THAT TIME THE VEHICLE WILL BE RE-LISTED FOR SALE OR OFFERED TO THE NEXT BUYER AT THE DISCRETION OF THE SELLER.  BALANCE OF PAYMENT IS DUE WITHIN 7 DAYS OF YOUR COMMITMENT TO BUY AND IS TO BE MADE C.O.D. IN THE FORM OF CASH, MONEY ORDER, CASHIER'S CHECK OR PERSONAL CHECK (ALL PERSONAL CHECKS MUST CLEAR PRIOR TO RELEASE OF THE VEHICLE WITH NO EXCEPTIONS).  IF APPLICABLE, BUYER IS RESPONSIBLE FOR ILLINOIS SALES TAX.